Budget ARNY Video Doorphones and Video Panels

The modern Arny AVD 410 video doorphone is a basic model in this line. The device is not equipped with any additional functions, but at the same time it has the perfectly implemented main function. The simple panel design, the familiar button controls, high-quality display, good sound and the absence of any complicated settings, as well as an affordable cost – this is not a complete list of advantages of the presented devices.

Main characteristics

4-inched” high-contrast display of 16х9 format with a resolution of 320x234 pixels.
Connection of two calling panels.
Connection of one additional video camera.
The capability of video output to an additional monitor.
Individual lock control on each panel.
Intercom function between video doorphones.
Setting of the master/slave operational mode – implementation of doorphone functions for two video panels and an intercom with only four wires.
Slim body with a full-featured power unit.
The capability of connecting an alternative power supply provides the uninterrupted operation.
These models are available in both black and white.
The doorphone dimensions are 120x170x20 mm (WxHxD)

Arny AVD 710M video doorphones

Arny AVD 710M video doorphone is an ideal combination of minimalistic design, extensive functionality and reasonable price. The functions of the presented budget model really amaze, because even a few models of the higher class may have such characteristics.

7-inched” high-contract screen of 16х9 format with a resolution of 800х480 pixels.
Connection of two calling panels.
Connection of two additional video cameras.
A memory block with video recording function working not only by pressing a button on the panel, but also by setting up alarm inputs.
Video outputs to an additional monitor.
Individual lock control on each of the panels.
Adjustable time for lock opening from two to ten seconds.
Alarm inputs for cameras and audio alarms for at the entrance.
Intercom function between the devices.
Setting of the master/slave operational mode – implementation of doorphone functions for two video panels with only four wires.
The capability to disable the inputs of panels and additional cameras in software.
16 ringtones for the call.
The capability to adjust the signal volume for different time of day.
Slim body with a full-featured power unit.
The capability of connecting an alternative power supply provides the uninterrupted operation.
Simple one-button navigation and setup.
User-friendly and simple video watching.
Interface in Russian.
White and black body colors.
200x140x16 mm (WxHxD)

When installing a system in which it is necessary to use more than one video doorphone, the simplest way is to use the master / slave mode. The first doorphone, which the calling panels are connected to, is considered to be the main (master) one, and the other doorphones are additional (slave). The maximum capacity of such systems are four doorphones and two panels. The devices must be connected in cascade: the output of the first is connected to the input of the second through special connectors (main and additional). It will be necessary to make the doorphones as additional ones on the menu or by means of a special jumper. Video doorphones of the presented series can be installed in one system, because they can work perfectly in such schemes. However, because of the fact that AVD 710M has a memory block, this is the doorphone that should be the main one.

The device can write the information to the memory card in several ways, but before the start, it is necessary to format the memory card and enable recording. The recording is produced in AVI format with a resolution of 720x288 pixels and continuous numbering.

Recording can be done by pressing the call button: after pressing the button, the audible signal sounds and the doorphone screen lights up, at this time recording starts on the corresponding panel. As a rule, the length of such a video is one minute.
Recording can also begin from additional cameras by alarm from external sensors: video doorphones are usually equipped with two inputs for connecting additional cameras and external sensors that are connected to a particular video input. It is necessary to set NO or NC contact type on the menu. After alarm input activation, an alarm signal is also activated, the screen of the device lights up and video recording starts. In such a case, video clips will last for two minutes.

Manual recording is made by the user who can independently turn it on from any channel, scrolling the wheel of the OSD menu up. In such a case, the audio signal is disabled and the video clip lasts for one minute.